Molal Concentration Unit
subclass of: Concentration Unit
type: Class

Area Time Temperature Unit
subclass of: Thermodynamics Unit
type: Class

Counting Unit
description: All units about counts. Examples are Atomic Number, Number, Number per Year, Percent and Sample per Second.
subclass of: Resource Unit
subclass of: Dimensionless Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#1
on property: description
max cardinality: 1
type: Restriction

Photometry Unit
subclass of: Light Unit
type: Class

Electric Charge Line Density Unit
description: The linear charge density is the amount of electric charge in a line. It is measured in coulombs per metre (C/m). Since there are positive as well as negative charges, the charge density can take on negative values. [Wikipedia]
subclass of: Electric Charge Density Unit
type: Class

Respiratory Rate Unit
subclass of: Biomedical Unit
type: Class

symbol
description: The symbol for a unit is a glyph that is used to represent the unit in a compact form. For example, the symbol for the US Dollar is $. This contrasts with unit:abbreviation, which gives a short alphanumeric abbreviation for the unit. (I.e. USD for US Dollar).
sub property of: literal
range: string
type: DatatypeProperty

type prefix
range: string
type: DatatypeProperty

Curvature Unit
description: The canonicall example of extrinsic curvature is that of a circle, which has curvature equal to the inverse of its radius everywhere. Smaller circles bend more sharply, and hence have higher curvature. The curvature of a smooth curve is defined as the curvature of its osculating circle at each point. The osculating circle of a sufficiently smooth plane curve at a given point on the curve is the circle whose center lies on the inner normal line and whose curvature is the same as that of the given curve at that point. This circle is tangent to the curve at the given point. That is, given a point P on a smooth curve C, the curvature of C at P is defined to be 1/R where R is the radius of the osculating circle of C at P. The magnitude of curvature at points on physical curves can be measured in diopters (also spelled dioptre) — this is the convention in optics. [Wikipedia]
subclass of: Space And Time Unit
type: Class

System of natural units
description: In physics, natural units are physical units of measurement based only on universal physical constants. For example the elementary charge e is a natural unit of electric charge, or the speed of light c is a natural unit of speed. A purely natural system of units is defined in such a way that some set of selected universal physical constants are normalized to unity; that is, their numerical values in terms of these units become exactly 1. Examples are Planck Units and Atomic Units. Atomic units (au or a.u.) form a system of natural units which is especially convenient for atomic physics calculations. There are two different kinds of atomic units, which one might name Hartree atomic units[1] and Rydberg atomic units, which differ in the choice of the unit of mass and charge. Planck units are unique among systems of natural units, because they are not defined in terms of properties of any prototype, physical object, or even elementary particle. [Wikipeda]
subclass of: System of Units
type: Class

Length Unit
subclass of: Space And Time Unit
type: Class

Power Per Area Unit
subclass of: Mechanics Unit
type: Class

Not Used With SI Unit
disjoint with: Used With SI Unit
description: A type specification for all units that are not used in the SI standard.
subclass of: Non SI Unit
type: DeprecatedClass
type: Class

Derived Unit
description: A DerivedUnit is a type specification for units that are derived from other units.
subclass of: Unit
type: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#6
type: DeprecatedClass
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#7
on property: type prefix
has value: UEM
type: Restriction

Volume Thermal Expansion Unit
description: When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion. Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by: * linear thermal expansion * area thermal expansion * volumetric thermal expansion These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications. Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. For exactly isotropic materials, the volumetric thermal expansion coefficient is very closely approximated as three times the linear coefficient. [Wikipedia]
subclass of: Thermal Expansion Unit
type: Class

element kind
type: ObjectProperty

Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#8
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#9
type: Class
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#10
description: A unit of measure, or unit, is a particular quantity value that has been chosen as a scale for measuring other quantities the same kind (more generally of equivalent dimension). For example, the meter is a quantity of length that has been rigorously defined and standardized by the BIPM (International Board of Weights and Measures). Any measurement of the length can be expressed as a number multiplied by the unit meter. More formally, the value of a physical quantity Q with respect to a unit (U) is expressed as the scalar multiple of a real number (n) and U, as Q = nU.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#11
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#12
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#13
subclass of: Thing
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#14
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#15

Magnetomotive Force Unit
description: Magnetomotive force is any physical cause that produces magnetic flux. In other words, it is a field of magnetism (measured in tesla) that has area (measured in square meters), so that (Tesla)(Area)= Flux. It is analogous to electromotive force or voltage in electricity. MMF usually describes electric wire coils in a way so scientists can measure or predict the actual force a wire coil can generate. [Wikipedia] This class contains the following instance(s): "Ampere turn", "Gilbert", "Oersted centimeter", "Unit pole".
subclass of: Electricity And Magnetism Unit
type: Class

Specific Heat Volume Unit
description: This class contains units of measure for specific heat capacity at a constant volume.
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#3
max length: 1024

allowed unit
inverse of: allowed unit of system
description: This property relates a unit system with a unit of measure that is not defined by or part of the system, but is allowed for use within the system. An allowed unit must be convertible to some dimensionally eqiuvalent unit that is defined by the system.
sub property of: system unit
type: ObjectProperty
type: DeprecatedProperty

Energy and work per mass amount of substance
subclass of: Chemistry Unit
type: Class

Radiance Unit
subclass of: Radiometry Unit
type: Class

Angular Mass Unit
description: The units of angular mass have dimensions of mass * area. They are used to measure the moment of inertia.
subclass of: Mechanics Unit
type: Class

Physical Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#16
subclass of: Science And Engineering Unit
type: Class

conversion coefficient
range: double
type: DatatypeProperty

Computing Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#17
subclass of: Science And Engineering Unit
type: Class

Inverse Amount Of Substance Unit
subclass of: Chemistry Unit
type: Class

Thermal Energy Unit
subclass of: Thermodynamics Unit
type: Class

Electrochemistry Unit
subclass of: Chemistry Unit
subclass of: Electricity And Magnetism Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#18
max inclusive: 100.00

basis element
type: FunctionalProperty
type: ObjectProperty

Temperature per time unit
subclass of: Thermodynamics Unit
type: Class

description
sub property of: description
range: string1024
type: DatatypeProperty

Electric Flux Density Unit
subclass of: Electric Charge Density Unit
type: Class

unit
inverse of: unit for
description: A reference to the unit of measure of a quantity (variable or constant) of interest.
range: Unit
type: ObjectProperty

Volume Unit
subclass of: Space And Time Unit
type: Class

abbreviation
description: An abbreviation for a unit is a short (usually 5 characters or less) string that is used in place of the full name for the unit in contexts where space is limited, or where using the abbreviation will enhance readability.
range: string
type: DatatypeProperty

Radiology Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#19
subclass of: Physical Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#20
max inclusive: 100

Molar Heat Capacity Unit
subclass of: Thermodynamics Unit
type: Class

Mass Amount Of Substance Temperature Unit
subclass of: Chemistry Unit
type: Class

Energy Per Area Unit
description: Units that quantify energy per unit area.
subclass of: Mechanics Unit
type: Class

coherent unit system
description: A system of units is coherent with respect to a system of quantities and equations if the system of units is chosen in such a way that the equations between numerical values have exactly the same form (including the numerical factors) as the corresponding equations between the quantities. In such a coherent system, no numerical factor other than the number 1 ever occurs in the expressions for the derived units in terms of the base units.
sub property of: unit system
type: FunctionalProperty
type: ObjectProperty

Length Temperature Time Unit
subclass of: Thermodynamics Unit
type: Class

Dimensionless Unit
description: A Dimensionless Unit is a quantity for which all the exponents of the factors corresponding to the base quantities in its quantity dimension are zero.
subclass of: Unit
type: Class

title
range: string
type: AnnotationProperty

Electric Charge Density Unit
description: The linear, surface, or volume charge density is the amount of electric charge in a line, surface, or volume. It is measured in coulombs per metre (C/m), square metre (C/m^2), or cubic metre (C/m^3), respectively. Since there are positive as well as negative charges, the charge density can take on negative values. [Wikipedia]
subclass of: Electricity And Magnetism Unit
type: Class

Energy per Electric Charge Unit
description: The ratio of energy to electric charge arises repeatedly in electrodynamics. It is the dimensional equivalent to the electrostatic potential and electromotive force. In both cases, the SI unit is the volt, or newton meters per coulomb.
subclass of: Electricity And Magnetism Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#22
on property: type prefix
has value: UB
type: Restriction

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#23
on property: order
max cardinality: 1
type: Restriction

Non SI Unit
disjoint with: SI Unit
description: A Non-SI unit. Typically an imperial measure.
subclass of: Physical Unit
type: DeprecatedClass
type: Class

Current Per Angle Unit
subclass of: Electricity And Magnetism Unit
type: Class

Energy Density Unit
description: Units that measure energy density, i.e. energy per unit volume.
subclass of: Mechanics Unit
type: Class

Thermal Energy Length Unit
subclass of: Thermodynamics Unit
type: Class

Thermal Resistivity Unit
subclass of: Thermodynamics Unit
type: Class

Power Unit
subclass of: Mechanics Unit
type: Class

Atomic Charge Unit
description: The electric charge of an ion, equal to the number of electrons the atom has gained or lost in its ionization multiplied by the charge on one electron. This class contains the following instance(s): "atomic number".
subclass of: Atomic Physics Unit
type: Class

Capacitance Unit
description: Capacitance is a measure of the amount of electric charge stored (or separated) for a given electric potential. This class contains the following instance(s): "Abfarad", "Farad", "MicroFarad", "NanoFarad", "PicoFarad", "Statfarad".
subclass of: Electricity And Magnetism Unit
type: Class

Magnetic Flux Unit
description: Magnetic flux is a measure of quantity of magnetism, taking into account the strength and the extent of a magnetic field. The SI unit of magnetic flux is the weber (in derived units: volt-seconds), and the unit of magnetic field is the weber per square meter, or tesla. [Wikipedia] This class contains the following instance(s): "Maxwell", "Unit pole", "Weber".
subclass of: Electricity And Magnetism Unit
type: Class

Exposure Unit
subclass of: Radiology Unit
type: Class

Electric Charge Volume Density Unit
description: The volume charge density is the amount of electric charge in a volume. It is measured in coulombs per cubic metre (C/m^3). Since there are positive as well as negative charges, the charge density can take on negative values. [Wikipedia]
subclass of: Electric Charge Density Unit
type: Class

Luminous Intensity Unit
subclass of: Photometry Unit
type: Class

prefix unit
inverse of: prefix unit of system
sub property of: defined unit
type: ObjectProperty
type: DeprecatedProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#25
min inclusive: 0.00

Angle unit
description: All units relating to specificaiton of angles.
subclass of: Space And Time Unit
subclass of: Dimensionless Unit
type: Class

coherent derived unit
inverse of: derived unit of system
sub property of: derived unit
sub property of: coherent unit
type: ObjectProperty

reference thing
type: ObjectProperty

Magnetic Flux Density Unit
subclass of: Electricity And Magnetism Unit
type: Class

Angular Velocity Unit
subclass of: Velocity Unit
type: Class

dimension inverse
type: FunctionalProperty
type: InverseFunctionalProperty
type: ObjectProperty
type: SymmetricProperty

Linear Velocity Unit
description: Linear Velocity units measure change of length per unit time. Examples include meters per second, miles per hour, knots, etc.
subclass of: Velocity Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#26
on property: currency exponent
cardinality: 1
type: Restriction

system unit
inverse of: unit of system
description: This property relates a system of units with a unit of measure that is either a) defined by the system, or b) accepted for use by the system and is convertible to a unit of equivalent dimension that is defined by the system. Systems of units may distinguish between base and derived units. Base units are the units which measure the base quantities for the corresponding system of quantities. The base units are used to define units for all other quantities as products of powers of the base units. Such units are called derived units for the system.
type: ObjectProperty

rights
range: string
type: AnnotationProperty

Quantity Kind Category
subclass of: Class
type: Class

Prefix Unit
description: Prefixes are either binary or decimal.
subclass of: Dimensionless Unit
type: Class

Area Thermal Expansion Unit
description: When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion. Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by: * linear thermal expansion * area thermal expansion * volumetric thermal expansion These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications. Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. For exactly isotropic materials, the area thermal expansion coefficient is very closely approximated as twice the linear coefficient.
subclass of: Thermal Expansion Unit
type: Class

Used With SI Unit
disjoint with: Not Used With SI Unit
description: A type specification for all units that are used in the SI standard.
subclass of: Non SI Unit
type: DeprecatedClass
type: Class

unit system
type: FunctionalProperty
type: ObjectProperty

conversion offset
range: double
type: FunctionalProperty
type: DatatypeProperty

Mass Amount Of Substance Unit
subclass of: Chemistry Unit
type: Class

Chemistry Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#27
subclass of: Physical Unit
type: Class

Linear Acceleration Unit
subclass of: Acceleration Unit
type: Class

exact constant
range: boolean
type: DatatypeProperty

Resistance Unit
description: Electrical resistance is a ratio of the degree to which an object opposes an electric current through it, measured in ohms. Its reciprocal quantity is electrical conductance measured in siemens. This class contains the following instance(s): "Abohm", "Ohm", "Statohm".
subclass of: Electricity And Magnetism Unit
type: Class

derived unit
description: This property relates a system of units to a unit of measure that is defined within the system in terms of the base units for the system. That is, the derived unit is defined as a product of the base units for the system raised to some rational power.
sub property of: defined unit
type: ObjectProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#28
on property: abbreviation
max cardinality: 1
type: Restriction

Rate Of Return Unit
subclass of: Financial Unit
type: Class

Amount Of Substance Unit
subclass of: Chemistry Unit
type: Class

Data Rate Unit
subclass of: Resource Unit
subclass of: Computing Unit
type: Class

defined unit of system
inverse of: defined unit
description: This property relates a unit of measure with the unit system that defines the unit.
sub property of: unit of system
type: ObjectProperty

description
range: string
type: AnnotationProperty

reference unit
sub property of: reference thing
type: ObjectProperty
type: FunctionalProperty

Temperature Unit
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#17
on property: type prefix
has value: UCPG
type: Restriction

subject
range: string
type: AnnotationProperty

creator
range: string
type: AnnotationProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#30
on property: type prefix
has value: UAP
type: Restriction

Communications Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#31
subclass of: Science And Engineering Unit
type: Class

base dimension enumeration
description: This property associates a system of quantities with an enumeration that enumerates the base dimensions of the system in canonical order.
type: FunctionalProperty
type: ObjectProperty

Logarithmic Unit
description: Logarithmic units are abstract mathematical units that can be used to express any quantities (physical or mathematical) that are defined on a logarithmic scale, that is, as being proportional to the value of a logarithm function. Examples of logarithmic units include common units of information and entropy, such as the bit, and the byte, as well as units of relative signal strength magnitude such as the decibel.
subclass of: Physical Unit
type: Class

Electric Current Unit
description: Electric current is the flow (movement) of electric charge. The SI unit of electric current is the ampere, and electric current is measured using an ammeter. This class contains the following instance(s): "Abampere", "Ampere", "Biot", "Statampere".
subclass of: Electricity And Magnetism Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#15
on property: symbol
max cardinality: 1
type: Restriction

SI Unit
description: An SI unit
subclass of: Physical Unit
type: DeprecatedClass
type: Class

Area Angle Unit
subclass of: Space And Time Unit
type: Class

Electric Current Density Unit
description: Electric current density is a measure of the density of flow of a conserved charge. Usually the charge is the electric charge, in which case the associated current density is the electric current per unit area of cross section, but the term current density can also be applied to other conserved quantities. It is defined as a vector whose magnitude is the current per cross-sectional area. [Wikipedia] In SI units, the electric current density is measured in amperes per square metre. This class contains the following instance(s): "Ampere per square meter".
subclass of: Electricity And Magnetism Unit
type: Class

Thermal Diffusivity Unit
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#33
on property: literal
cardinality: 1
type: Restriction

Thermal Conductivity Unit
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#34
on property: type prefix
has value: UST
type: Restriction

integer percentage
equivalent class: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#4
subclass of: integer
type: Datatype

Video Frame Rate Unit
subclass of: Computing Unit
type: Class

Energy And Work Unit
subclass of: Mechanics Unit
type: Class

literal
range: string
type: DatatypeProperty

base quantity kind of system
inverse of: system base quantity kind
sub property of: quantity kind of system
type: ObjectProperty

Atomic Physics Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#30
subclass of: Physical Unit
type: Class

Absorbed Dose Unit
subclass of: Radiology Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#6
on property: type prefix
has value: UD
type: Restriction

currency exponent
description: The currency exponent indicates the number of decimal places between a major currency unit and its minor currency unit. For example, the US dollar is the major currency unit of the United States, and the US cent is the minor currency unit. Since one cent is 1/100 of a dollar, the US dollar has a currency exponent of 2. However, the Japanese Yen has no minor currency units, so the yen has a currency exponent of 0.
range: integer
type: FunctionalProperty
type: DatatypeProperty

Decimal Prefix Unit
subclass of: Prefix Unit
subclass of: SI Unit
type: Class

Mass Temperature Unit
subclass of: Thermodynamics Unit
type: Class

Magnetic Field Strength Unit
description: A magnetic field is a vector field that permeates space and which can exert a magnetic force on moving electric charges and on magnetic dipoles (such as permanent magnets). [Wikipedia] The strength of a magnetic field at a point in space is the magnitude of the field vector at that point. This class contains the following instance(s): "Ampere per meter", "Ampere turn per inch", "Ampere turn per meter", "Oersted".
subclass of: Electricity And Magnetism Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#14
on property: conversion offset
max cardinality: 1
type: Restriction

defined unit
description: This property relates a unit system with a unit of measure that is defined by the system.
sub property of: system unit
type: ObjectProperty

generalization
inverse of: specialization
description: This property relates a quantity kind to its generalization. A quantity kind, PARENT, is a generalization of the quantity kind CHILD only if 1. PARENT and CHILD have the same dimensions in every system of quantities; 2. Every unit that is a measure of quantities of kind CHILD is also a valid measure of quantities of kind PARENT.
type: ObjectProperty

Thermal Expansion Unit
description: When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion. Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by: * linear thermal expansion * area thermal expansion * volumetric thermal expansion These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications. Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. [Wikipedia]
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#35
on property: symbol
max cardinality: 1
type: Restriction

Serum Or Plasma Level Unit
subclass of: Biomedical Unit
type: Class

Molar Concentration Unit
subclass of: Concentration Unit
type: Class

Coefficient Of Heat Transfer Unit
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#36
on property: type prefix
has value: USE
type: Restriction

Positive delta limit
description: A positive change limit between consecutive sample values for a parameter. The Positive Delta may be the encoded value or engineering units value depending on whether or not a Calibrator is defined.
range: string
type: DatatypeProperty

derived unit of system
inverse of: coherent derived unit
description: This property relates a unit of measure to the unit system in which the unit is derived from the system's base units with a proportionality constant of one.
sub property of: coherent unit of system
sub property of: derived unit of system
type: ObjectProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#37
on property: type prefix
has value: UFC
type: Restriction

Time Unit
description: Units that measure time.
subclass of: Space And Time Unit
type: Class

Activity Unit
subclass of: Radiology Unit
type: Class

Signal Detection Threshold Unit
description: Signal relative to an underlying signal
subclass of: Communications Unit
type: Class

order
range: nonNegativeInteger
type: DatatypeProperty

Heart Rate Unit
subclass of: Biomedical Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#13
on property: UNECE common code
max cardinality: 1
type: Restriction

SI Derived Unit
disjoint with: SI Base Unit
subclass of: Derived Unit
subclass of: SI Unit
type: Class
type: DeprecatedClass

Electric Flux Unit
subclass of: Electricity And Magnetism Unit
type: Class

float percentage
equivalent class: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#38
subclass of: float
type: Datatype

Acceleration Unit
subclass of: Space And Time Unit
type: Class

Permittivity Unit
subclass of: Electricity And Magnetism Unit
type: Class

Mechanics Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#39
subclass of: Physical Unit
type: Class

Concentration Unit
subclass of: Chemistry Unit
type: Class

Pressure or stress rate
subclass of: Mechanics Unit
type: Class

unit for
inverse of: unit
type: ObjectProperty

vector magnitude
range: float
type: FunctionalProperty
type: DatatypeProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#41
on property: description
max cardinality: 1
type: Restriction

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#11
on property: abbreviation
max cardinality: 1
type: Restriction

Specific Heat Pressure Unit
description: This class contains units of measure for specific heat capacity at a constant pressure.
subclass of: Thermodynamics Unit
type: Class

string1024
equivalent class: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#24
subclass of: string
type: Datatype

relative standard uncertainty
description: The relative standard uncertainty of a measurement is the (absolute) standard uncertainty divided by the magnitude of the exact value.
range: double
type: DatatypeProperty

quantity kind of system
inverse of: system quantity kind
type: ObjectProperty

standard uncertainty
description: The standard uncertainty of a quantity is the estimated standard deviation of the mean taken from a series of measurements.
range: double
type: DatatypeProperty

Bending Moment Or Torque Unit
subclass of: Mechanics Unit
type: Class

allowed unit of system
inverse of: allowed unit
description: This property relates a unit of measure with a unit system that does not define the unit, but allows its use within the system. An allowed unit must be convertible to some dimensionally eqiuvalent unit that is defined by the system.
sub property of: unit of system
type: ObjectProperty

system base quantity kind
inverse of: base quantity kind of system
sub property of: system quantity kind
type: ObjectProperty

Force Per Electric Charge Unit
subclass of: Electricity And Magnetism Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#42
on property: type prefix
has value: UF
type: Restriction

prefix unit of system
inverse of: prefix unit
sub property of: defined unit of system
type: DeprecatedProperty
type: ObjectProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#43
on property: type prefix
has value: UBM
type: Restriction

code
description: A unit code is a numeric string that uniquely identifies a unit
range: string
type: DatatypeProperty

system quantity kind
inverse of: quantity kind of system
type: ObjectProperty

Absorbed Dose Rate Unit
subclass of: Radiology Unit
type: Class

Linear Momentum Unit
subclass of: Momentum Unit
type: Class

value for quantity
inverse of: quantity value
type: ObjectProperty

Mass Unit
subclass of: Mechanics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#44
on property: element
min cardinality: 1
type: Restriction

Time Squared Unit
subclass of: Space And Time Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#9
on property: type prefix
has value: U
type: Restriction

system dimension
type: ObjectProperty

Plane Angle Unit
subclass of: Angle unit
type: Class

value
description: A property to relate an observable thing with a quantity value (qud:QuantityValue)
type: ObjectProperty

Heat Flow Rate Unit
subclass of: Thermodynamics Unit
type: Class

with attribution to
type: ObjectProperty

Solid Angle Unit
description: The solid angle subtended by a surface S is defined as the surface area of a unit sphere covered by the surface S's projection onto the sphere. A solid angle is related to the surface of a sphere in the same way an ordinary angle is related to the circumference of a circle. Since the total surface area of the unit sphere is 4*pi, the measure of solid angle will always be between 0 and 4*pi.
subclass of: Angle unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#10
on property: conversion multiplier
max cardinality: 1
type: Restriction

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#45
on property: type prefix
has value: UH
type: Restriction

Event Unit
subclass of: Resource Unit
type: Class

Mass Per Volume Unit
subclass of: Mechanics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#46
on property: system unit
min cardinality: 1
type: Restriction

Dose Equivalent Unit
subclass of: Radiology Unit
type: Class

Radiometry Unit
subclass of: Light Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#47
on property: default
max cardinality: 1
type: Restriction

Frequency Unit
subclass of: Space And Time Unit
type: Class

Velocity Unit
subclass of: Space And Time Unit
type: Class

Momentum Unit
subclass of: Mechanics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#48
on property: type prefix
has value: UTD
type: Restriction

specialization
inverse of: generalization
description: This property relates a quantity kind to its specialization(s). For example, linear velocity and angular velocity are both specializations of velocity.
type: ObjectProperty

Dynamic Viscosity Unit
subclass of: Mechanics Unit
type: Class

Thermal Resistance Unit
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#12
on property: description
max cardinality: 1
type: Restriction

Microbial Formation Unit
subclass of: Biomedical Unit
type: Class

Atomic Mass Unit
subclass of: Atomic Physics Unit
type: Class

element
description: An element of an enumeration
type: ObjectProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#31
on property: type prefix
has value: UCMN
type: Restriction

Heat Capacity And Entropy Unit
subclass of: Thermodynamics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#50
on property: abbreviation
max cardinality: 1
type: Restriction

Specific Energy Unit
description: Units which quantify specific energy, i.e. energy per unit mass.
subclass of: Mechanics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#51
on property: description
max cardinality: 1
type: Restriction

Time Area Unit
subclass of: Space And Time Unit
type: Class

Catalytic Activity Unit
subclass of: Chemistry Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#52
on property: code
max cardinality: 1
type: Restriction

numeric value
range: double
type: DatatypeProperty

system derived quantity kind
inverse of: derived quantity kind of system
sub property of: system quantity kind
type: ObjectProperty

Space And Time Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#34
subclass of: Physical Unit
type: Class

Turbidity Unit
description: Turbidity is the cloudiness or haziness of a fluid caused by individual particles (suspended solids) that are generally invisible to the naked eye, similar to smoke in air.
subclass of: Biomedical Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#8
on property: type prefix
cardinality: 1
type: Restriction

conversion multiplier
range: double
type: FunctionalProperty
type: DatatypeProperty

Financial Unit
description: This class contains units that measure financial quantities, such as currency, transactions, rates of return, etc.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#42
subclass of: Resource Unit
type: Class

SI Base Unit
disjoint with: SI Derived Unit
description: All SI units are derived from the SI Base units
subclass of: Base Unit
subclass of: SI Unit
type: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#53
type: DeprecatedClass
type: Class

Force Unit
subclass of: Mechanics Unit
type: Class

Angular Acceleration Unit
subclass of: Acceleration Unit
type: Class

Luminance Unit
subclass of: Photometry Unit
type: Class

Thrust To Mass Ratio Unit
subclass of: Mechanics Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#27
on property: type prefix
has value: UCHM
type: Restriction

Thermal Insulance Unit
subclass of: Thermodynamics Unit
type: Class

negative delta limit
description: A negative change limit between consecutive sample values for a parameter. The Negative Delta may be the encoded value or engineering units value depending on whether or not a Calibrator is defined.
range: string
type: DatatypeProperty

Enumeration
subclass of: Enumeration
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#47
description: This class is for describing the enumerations themselves. Having an enumerated value is one concept. Having a way to descrive the set of enumerated valies is a distinct need. An enumeration is a collection of enumeration elements. In some cases it is necesaary to refer to the enumeration as opposed to one of its values.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#44
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#49
type: Class
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#41
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#32
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#50

unit of system
inverse of: system unit
description: This property relates a unit of measure with a system of units that either a) defines the unit or b) allows the unit to be used within the system.
type: ObjectProperty

Energy per Electric Charge Unit
description: The ratio of power to electric charge is proportional to the rate of change of electric potential.
subclass of: Electricity And Magnetism Unit
type: Class

Enumerated Value
description: This class is for all enumerated and/or coded values. For example, it contains the dimension objects that are the basis elements in some abstract vector space associated with a quantity kind system. Another use is for the base dimensions for quantity systems. Each quantity kind system that defines a base set has a corresponding ordered enumeration whose elements are the dimension objects for the base quantity kinds. The order of the dimensions in the enumeration determines the canonical order of the basis elements in the corresponding abstract vector space.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#33
type: Class
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#23
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#35
subclass of: EnumeratedValue
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#52
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#1
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#28

Length Temperature Unit
subclass of: Thermodynamics Unit
type: Class

Electric Dipole Moment Unit
description: The electric dipole moment (or electric dipole for short) is a measure of the polarity of a system of electric charges. [Wikipedia] This class has the following instance(s): "Coulomb meter", "Debye".
subclass of: Electricity And Magnetism Unit
type: Class

Kinematic Viscosity Unit
subclass of: Mechanics Unit
type: Class

Biomedical Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#43
subclass of: Science And Engineering Unit
type: Class

Volume per mass unit
subclass of: Mechanics Unit
type: Class

Information Entropy Unit
subclass of: Resource Unit
subclass of: Logarithmic Unit
subclass of: Computing Unit
type: Class

Molar Energy Unit
subclass of: Chemistry Unit
type: Class

Light Unit
subclass of: Electricity And Magnetism Unit
type: Class

System of Units
description: A system of units is a set of units which are chosen as the reference scales for some set of quantity kinds together with the definitions of each unit. Units may be defined by experimental observation or by proportion to another unit not included in the system. If the unit system is explicitly associated with a quantity kind system, then the unit system must define at least one unit for each quantity kind.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#51
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#40
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#46
type: Class

base unit
inverse of: base unit of system
description: This property relates a system of units to a base unit defined within the system. The base units of a system are used to define the derived units of the system by expressing the derived units as products of the base units raised to a rational power.
sub property of: coherent unit
type: ObjectProperty

Science And Engineering Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#36
subclass of: Unit
type: Class

exact match
type: TransitiveProperty
type: ObjectProperty
type: SymmetricProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#19
on property: type prefix
has value: UROY
type: Restriction

base unit of system
inverse of: base unit
description: This property relates a unit of measure to the system of units in which it is defined as a base unit for the system. The base units of a system are used to define the derived units of the system by expressing the derived units as products of the base units raised to a rational power.
sub property of: coherent unit of system
type: ObjectProperty

Human Unit
description: units for measuring human resources
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#45
subclass of: Resource Unit
type: Class

quantity
description: a property to relate an observable thing with a quantity (qud:Quantity)
type: ObjectProperty

Gravitational Attraction Unit
subclass of: Mechanics Unit
type: Class

Mass Per Area Unit
subclass of: Mechanics Unit
type: Class

Illuminance Unit
subclass of: Photometry Unit
type: Class

Area Unit
subclass of: Space And Time Unit
type: Class

Mass Per Time Unit
subclass of: Mechanics Unit
type: Class

Electricity And Magnetism Unit
description: The class of units used to measure the properties of electricity and magnetism.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#7
subclass of: Physical Unit
type: Class

Permeability Unit
subclass of: Electricity And Magnetism Unit
type: Class

Resource Unit
description: A Resource Unit is a unit for measuring the amount of various types of resources.
subclass of: Unit
type: Class

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#53
on property: type prefix
has value: USI
type: Restriction

Angular Momentum Unit
subclass of: Momentum Unit
type: Class

Luminous Efficacy Unit
subclass of: Photometry Unit
type: Class

Area Temperature Unit
subclass of: Thermodynamics Unit
type: Class

Linear Thermal Expansion Unit
description: When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion. Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by: * linear thermal expansion * area thermal expansion * volumetric thermal expansion These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications. Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. [Wikipedia]
subclass of: Thermal Expansion Unit
type: Class

Luminous Energy Unit
subclass of: Photometry Unit
type: Class

quantity value
inverse of: value for quantity
type: ObjectProperty

coherent unit of system
inverse of: coherent unit
description: A coherent unit of measurement for a unit system is a defined unit that may be expressed as a product of powers of the system's base units with the proportionality factor of one.
sub property of: defined unit of system
type: DeprecatedProperty
type: ObjectProperty

Binary Prefix Unit
subclass of: Prefix Unit
type: Class

Base Unit
description: A Base Unit is a unit adopted by convention for a base quantity.
subclass of: Unit
type: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#22
type: DeprecatedClass
type: Class

contributor
range: string
type: AnnotationProperty

Radiant Intensity Unit
subclass of: Radiometry Unit
type: Class

Volume per Time Squared Unit
subclass of: Mechanics Unit
type: Class

Force Per Length Unit
subclass of: Mechanics Unit
type: Class

Linear Energy Transfer Unit
subclass of: Atomic Physics Unit
type: Class

Inductance Unit
description: An electric current flowing around a circuit produces a magnetic field and hence a magnetic flux through the circuit. The ratio of the magnetic flux to the current is called the inductance, or more accurately self-inductance of the circuit. [Wikipedia] This class contains the following instance(s): "Abhenry", "Henry", "Micro Henry", "Milli Henry", "Stathenry".
subclass of: Electricity And Magnetism Unit
type: Class

Electric Charge Unit
description: Electric charge is a fundamental conserved property of some subatomic particles, which determines their electromagnetic interaction. Electrically charged matter is influenced by, and produces, electromagnetic fields. The interaction between a moving charge and an electromagnetic field is the source of the electromagnetic force, which is one of the four fundamental forces.
subclass of: Electricity And Magnetism Unit
type: Class

Electric Charge Per Amount Of Substance Unit
subclass of: Electrochemistry Unit
type: Class

default
description: The default element in an enumeration
type: ObjectProperty

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#39
on property: type prefix
has value: UMH
type: Restriction

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#55
min inclusive: 0

Electric Field Strength Unit
description: The strength of the electric field at a given point is defined as the force that would be exerted on a positive test charge of +1 coulomb placed at that point; the direction of the field is given by the direction of that force. Electric fields contain electrical energy with energy density proportional to the square of the field intensity. The electric field is to charge as gravitational acceleration is to mass and force density is to volume.
subclass of: Electricity And Magnetism Unit
type: Class

Volume Per Time Unit
description: A "Space And Time" Unit with the following instance(s): "Cubic foot per minute", "Cubic foot per second", "Cubic inch per minute", "Cubic meter per second", "Cubic yard per minute", "Gallon per day", "Gallon per minute".
subclass of: Space And Time Unit
type: Class

Specific Heat Capacity Unit
subclass of: Thermodynamics Unit
type: Class

coherent unit
inverse of: coherent unit of system
description: A coherent unit of measurement for a unit system is a defined unit that may be expressed as a product of powers of the system's base units with the proportionality factor of one.
sub property of: defined unit
type: ObjectProperty
type: DeprecatedProperty

derived unit of system
inverse of: derived unit
description: This property relates a unit of measure to the system of units in which it is defined as a derived unit. That is, the derived unit is defined as a product of the base units for the system raised to some rational power.
sub property of: defined unit of system
type: ObjectProperty

Conductance Unit
description: Electrical conductance is the inverse of electrical resistance. It measures the ease with which electricity flows along a path through an electrical element. This class contains the following instance(s): "Abmho", "Mho", "Siemens", "Statmho".
subclass of: Electricity And Magnetism Unit
type: Class

Mass Per Length Unit
subclass of: Mechanics Unit
type: Class

Currency Unit
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#37
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#26
subclass of: Financial Unit
type: Class

Electric Charge Area Density Unit
subclass of: Electric Charge Density Unit
type: Class

UNECE common code
range: string
type: DatatypeProperty

RF-Power Unit
subclass of: Communications Unit
type: Class

Quantities, Units, Dimensions and Types (QUDT) Ontology Version 1.1
uses non imported resource: creator
has aspect scope: Basic treatment of quantities and units. No dimensional treatment in this graph.
revision number: 1.1
with attribution to: NASA-ARC-Attribution
with attribution to: TopQuadrantAttribution
contributor: Daniel Mekonnen
last updated: $LastChangedDate: 2011-06-01 14:56:40 -0700 (Wed, 01 Jun 2011) $
version info: $Id: OSG_qudt-(v1.1).ttl 4989 2011-06-01 21:56:40Z RalphHodgson $
namespace prefix: qudt
uses non imported resource: author
uses non imported resource: subject
uses non imported resource: title
uses non imported resource: description
uses non imported resource: closeMatch
uses non imported resource: exactMatch
type: Ontology
has license type: CC-SHAREALIKE 3PT0-US
has domain scope: Science, Medicine and Engineering
specificity: 1
version IRI: qudt
intent: Provides a schema for describing Units of Measure
subject: Quantities, Units, Dimensions and Types
contributor: Irene Polikoff
has catalog entry: QUDT-SchemaCatalogEntry
date created: 2011-01-06T09:30:49
uses non imported resource: rights
rights: The QUDT Ontologies are issued under a Creative Commons Attribution Share Alike 3.0 United States License. Attribution should be made to NASA Ames Research Center and TopQuadrant, Inc.
description: The QUDT, or 'Quantity, Unit, Dimension and Type' collection of ontologies define the base classes properties, and restrictions used for modeling physical quantities, units of measure, and their dimensions in various measurement systems. The goal of the QUDT ontology is to provide a unified model of, measurable quantities, units for measuring different kinds of quantities, the numerical values of quantities in different units of measure and the data structures and data types used to store and manipulate these objects in software. This OWL schema is a foundation for a basic treatment of units.
has discipline scope: All disciplines
uses non imported resource: CC-SHAREALIKE 3PT0-US
uses non imported resource: contributor
has role: SchemaGraph
label: Quantities, Units, Dimensions and Types (QUDT) - Level 1
contributor: Ralph Hodgson
contributor: David Price
acronym: QUDT
creator: James E. Masters
imports: dtype
imports: vaem

http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#16
on property: type prefix
has value: UPHS
type: Restriction

quantity kind
type: ObjectProperty

Amount of substance temperature unit
subclass of: Chemistry Unit
type: Class

derived quantity kind of system
inverse of: system derived quantity kind
sub property of: quantity kind of system
type: ObjectProperty

Thermodynamics Unit
description: Thermodynamics units are units that provide reference scales for quantifying the conversion of energy into work, as well as heat and its relation to macroscopic variables such as temperature and pressure.
subclass of: http://lodlaundromat.org/.well-known/genid/samples/jena///predicate//c3074a80b58a81f7205d2d00d1cf1112/5eba8bab89380303fab69e3d8b24ab2f#48
subclass of: Physical Unit
type: Class

Luminous Flux Unit
subclass of: Photometry Unit
type: Class

Pressure Or Stress Unit
subclass of: Mechanics Unit
type: Class